We hope you love the products we recommend! Just so you know, we may collect a share of sales or other compensation from the links on this page. Thank you if you use our links,we really appreciate it!
What are the best scuba diving wetsuit seams?
What are the best scuba diving wetsuit seams – Did you know that the type of seam on your wetsuit matters? When choosing a suit, it’s important to choose based not only on how watertight and comfortable they are but also on their warmth. A wetsuit seam type can play a key role in how watertight and comfortable the suit is, so you want to make sure that it’s right for you..
The thicker the wetsuit and the more water it traps, you’ll be warmer. To do this effectively though your suit will have to fit like a second skin – no room for gaps or loose areas of fabric! There are two types: those that feature separate panels stitched together (a better option all around), but seams can create problems in some cases so keep an eye out for them.
Seams are one of the most important features to look for in a good quality wetsuit. Without them, you’ll be much more limited when paddling or surfing because your range will be restricted by seams that run along with key areas like the shoulders and underarms.
Chafing is a very common problem with seams. Leaking: Being the area that panels are joined means seams can be an area in which leaks often occur.
Neoprene is a durable waterproof fabric that can be used to make wetsuits. The stitching process leaves tiny holes in the material which may result in leaks around the seams if not done properly and carefully by an experienced stitcher. Different types of stitches come with different levels of quality, so it’s important for you or your consumer to know what type they’re buying before making any decisions about suit brands and prices.
Cressi Womens MedX Lady Shorty Wetsuit. This 2.5mm double lined 100% Neoprene shorty wetsuit is ideal for snorkelling and diving in tropical waters.
- Ideal for snorkelling and Diving in tropical waters.
- 2.5mm Neoprene
- rear zipper
- Adjustable collar with Velcro closure.
Are the simplest way to stitch together similar panels and seams. The two edges are rolled inwards, then stitched back into a durable seam (much less flexible than other methods). Overlocked seams can be found on cheaper wetsuits or summer suits but should not be confused with more advanced stitching techniques that create additional strength along the entire length of your suit’s seams for increased flexibility at all angles.
Flatlock seams are traditionally used on summer wetsuits for the increased flexibility and durability they provide. The downside to this design is that it creates a lot of holes that can let water in, so flatlock stitching typically isn’t used on anything other than suits made from neoprene.
Blindstitching is the best option for cold water surfing. The panel edges are glued together, end to end then stitched on the inside of the neoprene. However, unlike some other stitching methods where stitches go all through and out both sides of a seam (making it more prone to leaking), Blind-Stitch stitch only goes partially through and not as far as either side – this makes them fully waterproof but super flexible with an unbelievable stronghold!
Seals Wetsuits are an important piece of equipment for many people in the water. They provide protection from a variety of conditions, such as sunburns and cold temperatures. Seams may be sealed or taped to help protect against leaks that could lead to being wet all day long!
Taped seams: Tape is applied to the inside of the seams for added strength. Taping in strategic areas ensures these are reinforced where they need it most, while fully taping means all parts will be strengthened by tape.
Sealed seams: If you’re looking for a suit that’ll keep out the water, look no further than one with sealed seams. These are available in three different forms– liquid-sealed, fluid-sealed and welded suits.
Liquid Seals – This type of seal is applied by dipping your entire suit into an anti-freeze solution until every inch has been soaked through completely (don’t worry about anything inside). Once this process finishes up, as long as you don’t get hit too hard on it or if there’s any other damage to the exterior or interior of the material then this will be pretty much airtight from top to bottom. The downside is that they can lose their effectiveness over time.
The takeaway from this is that if you’re looking for a wetsuit, it’s important to look at the seams. If you’ll be in cold water often and your suit will get beat up on a regular basis, consider these types of details: GBS seam construction or taped/sealed seams with reinforced stitching).
If you need to be able to move around freely, then consider opting for a wetsuit that has fewer seams. A suit with more panels may have better flexibility and is likely easier to get on without help from another person – but it also means there will likely be fewer seams that provide stronger protection against the cold water during your dive.